Load Bank

Load Bank

Load Bank is used to test and evaluate performance of Generators and UPS periodically, under various load conditions like full load/Inductive load/ sudden loads and Overload. Sometimes, it is used as Dummy Load for the generator to avoid Glazing of Pistons while running on very low load conditions.

Technical specification:

  • Range : Up to 12 MW
  • Degree of protection : IP 21 / 33
  • Service : Indoor / Outdoor
  • Enclosure Finishing : Epoxy powder coat painted / Galvanized
  • Mounting type : Stationary / Wheel Mounting / Trolley or Trailer Mounted / Container housing
  • Voltage : 24 V to 1500 V DC / 24 V to 33 kV for AC – 1Ph and 3 Ph
  • Frequency : 50 / 60 / 400 Hz
  • Standard followed : BS587
  • Power Factor : Resistor / Resistor – Reactive, Unity / 0.4 PF / 0.8 PF
  • Control : Local / Remote, Contactor Switching
  • Selection of Loads : Through Push Buttons or PLC / By hand held stations or By Laptop
  • Meters : Recording by Laptop / Multifunction Digital meter to indicate
  • PF/V/I/KW/KVAR/Hour
  • Ventilation : Natural / Fan cooled – Vertical / Horizontal